If you have just purchased a steel building or already have one, you might be thinking about also adding insulation to it. Insulating steel buildings is not the easiest thing to do, but if you take your time and follow the pointers here as well as any directions that might come with both the building and the insulation that you buy, you should be able to do it yourself and for a lot less money than if you were to hire someone else to do it for you.
If you decide to do it yourself it is important that you know how to figure out how much insulation will be needed. The size and shape of your building a long with what kind of climate has an influence just how much you will need. Make sure to measure your building and then add that to the average climate and you should be able to get the right amount of insulation for your steel building at a hardware store or home improvement store.
Most people use one of two different types of insulation. The first one is called foam and it can be blown onto the walls for insulation. A lot of these types need drywall but you can find some that do not require it. The other common form of insulation would be fiberglass can be used with or without drywall.
If you go with the fiberglass it comes in rolls that is easy to unroll when you need it. Foam style can be purchased in different kits to suit your needs. There is also a type that gives a barrier for fire protection and is rather cheap.
The cheaper insulation that is created by using recycled denim, wool as well as plastics. Make sure that insulation that you do purchase has protection against mold and other pollutants.
The main reason for insulating your metal buildings is to help keep the warmth inside the building during the very cold months of the year. Other things you need to consider at the same time is to make sure that you have insulation that will protect the building against water, vapor and or ice. All of which can damage your building and its frame because these things can corrode the building quite quickly.
You will need a couple of things to install your insulation. That would be the insulation of course, some double sided tape, metal tape and a measuring tape. After you have those items you are set to go. If this is for a building that is new and you have not yet finished putting it together, you should put the insulation in between your frame of the building and the sheeting of the building.
The first thing you are going to want to do is take the tape that has two adhesive sides and place it on the framework of the building the insulation is going. If fiberglass is what you are using just carefully unroll some of your insulation and put it on the tape. Once you have done this it is important that you make sure there is enough room for air to flow through the insulation and the walls of the building.
Once you have done this you can take the steel garages and make sure to put it over the insulation that is taped to the frame of your metal buildings. Take the strapping and make sure it holds the insulation tightly.
Should you have a building that was erected prior to wanting to install the insulation put the double sided tape on the frame on the inside of the building. You will need to make sure that the tape is put only where the insulation can actually fit.
Take the insulation and attach it to the tape you have placed on the framework of the building. Make sure that the insulation is sagging a little bit so that it will have enough room for the air to circulate through.
Now attach the building sheeting and make sure to take metal tape to tape over the seams to ensure good insulation throughout the building.
Note for safety when needed you should wear goggles, hard hat and a mask to protect you from harmful dust particles in the air.
Future Steel offers a complete line of pre-engineered, pre-fabricated steel buildings, workshops and steel garage kits, commercial buildings that can be customized to your specifications.